A Spencer water damage inspection isn't a walk-through with a flashlight. It's a systematic, instrument-driven assessment that produces a written report showing exactly where the water went, how saturated each affected assembly is, and what needs to happen next.
Here's what makes our Spencer inspection service more than a visual walk-through.
FLIR infrared thermal cameras detect temperature differentials in structural surfaces — a wet wall cavity cools differently than a dry one during evaporation, making moisture migration visible as a thermal signature even behind intact drywall. Our Spencer inspection team uses thermal imaging as the primary tool for tracing water migration paths through wall systems, subfloor assemblies, and ceiling cavities, identifying affected areas before a single pin is driven into a wall.
Thermal imaging shows probable moisture — calibrated moisture meters confirm it. Our Spencer inspectors use both pin-type meters (direct reading in framing and structural members) and non-penetrating radio-frequency meters (surface reading through drywall and flooring) to take quantified moisture content readings at all thermal-identified locations. These readings are recorded at labeled sensor points and become the data basis for the written inspection report.
Every COS Water Damage Restoration Spencer water damage inspection produces a written report: affected area descriptions, thermal images with annotations, moisture meter readings at labeled sensor points, water category determination (Cat 1/2/3), and a recommended scope of work with priority sequencing. Reports are formatted to be useful to your insurance carrier, a remediation contractor, or a real estate transaction where water damage disclosure is at issue.
Both use cases are available in Spencer — contact us with your specific situation and our inspector will scope the right assessment.
Here are the specific inspection scenarios and assembly types our Spencer team handles.
Active event inspection is the step that prevents under-scoped remediation and missed hidden damage.
Real estate transactions in Spencer frequently involve properties with prior water events — disclosed and undisclosed. Our pre-purchase inspection uses thermal imaging and moisture meters to identify active moisture in structural assemblies, staining patterns consistent with prior water intrusion, and the condition of previous remediation. For Spencer buyers, this inspection provides either confidence that a disclosed water event was properly handled, or documentation that it was not — giving the buyer negotiating leverage and a clear picture of what additional remediation cost, if any, is warranted.
After a water damage remediation project is completed in a Spencer property — whether by COS Water Damage Restoration or another company — a verification inspection confirms that structural drying was completed to standard moisture content levels and that no hidden moisture was left behind. This inspection is requested by property owners who want independent confirmation of completion, by landlords who need documentation before returning a property to tenancy, and by sellers who need to demonstrate to a buyer that prior water damage was fully resolved. Our Spencer post-remediation inspection produces a written verification report formatted for real estate and insurance use.
Mold risk assessment in Spencer is distinct from air quality testing. We assess structural conditions and visible evidence — not air samples.
Below-grade moisture in Spencer properties is underdetected and underlies a significant portion of structural issues discovered later.
When an insurance carrier requests additional documentation for a water damage claim — or when a claim has been disputed based on damage scope — our Spencer insurance documentation inspection provides the instrument-backed evidence that supports the remediation scope. Thermal images with annotations, moisture meter readings at labeled sensor points, water category determination, and written assessment of the connection between the reported event and the documented damage create a claim file that can withstand adjuster scrutiny.


Same-day scheduling available for active water events. Pre-purchase inspections booked on your transaction timeline.
Our Spencer inspector arrives with FLIR thermal camera, calibrated pin-type and non-penetrating moisture meters, and inspection documentation tools. The inspection begins with a thermal pass of all suspected affected areas, followed by direct meter readings at all thermally identified locations. Each reading is recorded at a labeled sensor point location on the floor plan.
After the on-site assessment, your Spencer inspector reviews the key findings with you — which areas are affected, what the readings indicate, what water category applies, and what remediation is indicated. If you have questions about specific readings or want to understand what a particular finding means, this is the conversation for it. The verbal review happens on-site.
Report delivered in the format your use case requires, within 48 hours of inspection.



"We were purchasing a Spencer home where the seller had disclosed a prior basement water event and claimed it was fully remediated. COS Water Damage Restoration's pre-purchase inspection found moisture readings in the wall framing adjacent to the original event area that were significantly above dry standard — indicating incomplete drying. The written report we received gave us specific sensor point readings that we used to negotiate remediation credit from the seller before closing. Without that inspection, we would have closed into a mold problem."
"We used the COS Water Damage Restoration Spencer inspection report to file a homeowner's claim for a water damage event. The adjuster reviewed the thermal image documentation and sensor point readings and approved the full remediation scope on first submission. The inspection report paid for itself many times over by eliminating the supplement process."
"The post-remediation verification inspection is what I most value. After our last Spencer property water event, the remediation contractor signed off on completion. We had COS Water Damage Restoration do a verification inspection and found one wall section with framing still above 15% moisture content. That section would have been a mold problem within weeks. The verification inspection caught it before it became our problem."
COS Water Damage Restoration's certified inspection team serves Spencer and surrounding communities throughout SD. Call +1-844-499-0972 to schedule your Spencer inspection.
Whether you need inspection for an active event, a purchase, or post-remediation verification — our Spencer team produces a written, instrument-backed report. Call +1-844-499-0972 to schedule.
📞 Call +1-844-499-0972 — Schedule Spencer InspectionIICRC Certified · FLIR Thermal Imaging · Written Reports · Spencer, SD